Dental Curing Light, LED.B

Request a Quote

Website: http://dentalchairpackage.com/1-1-dental-curing-lights.html

3-second curing cycle, providing short curing time adequate for bonding ceramic brackets to tooth in orthodontic treatment, and placing porcelain veneers;
Curing light meter is equipped to accurately measure the light output, providing the dentist with the information to determine whether the light intensity is influenced by power or other factors;
Four curing modes are available, Standard / Gradual/ Pulse/ 3-second Cure;

High power 7W blue light LED, light intensity is up to 2,000mW/cm²;

Cordless handpiece with rechargeable battery, charging base is available;

Built-in light intensity sensor;

2200mAh high capacity lithium battery, a full charge allows for more than 400 times continuously under working mode of 10 seconds per cycle;

battery can last 6 hours after full charge;

Constant light output, the light intensity will not decrease even when the battery is low;

Specifications

Model	LED.B
Material	Plastic
Curing Mode	L1: Standard mode L2: Gradual mode L3: Pulse mode L4: 3-second cure mode
Time Setting	L1/L2/L3 modes: 5s, 10s, 15s, 20s, 25s, 30s ,35s, 40s (optional) L4 mode: 3s, 5s, 10s (optional)
Battery	2200Mah (rechargeable) D.C.3.7V
Input Voltage	AC100~240V 50/60Hz 5V2A
Light Intensity	L1/L2/L3 modes: 1000-1400mW/cm² L4 mode: 1600-1800mW/cm²
Wavelength	420-480nm
Features	7W high power LED; Constant light intensity; Charging base with light meter, allowing for measuring light intensity any time; 3-second cure mode, primarily suitable for porcelain veneer restoration;

Related Manufacturies