TVVBG Elevator Flat Cable with Wire Rope
TVVBGElevator Flat Cable with Wire Rope
Construction
TVVBG 300/500V 60*0.75 mm2
Introduction of Elevator Flat Cable
1.Insulation and Sheath: PVC insulation, PVC sheath
2.Wire rope: Φ3.0mm Flexible wire rope, Min. breaking strength 7.28KN.
3. Rated voltage: 300/500V
4. Static flexibility test: 0.3m<L<0.6m
5. Vertical burn test: passed GB/T18380.11-2008, IEC60332-1:2004 tests
6. Product standard: GB5023.6, IEC60227-6, EN50214
Guide to Using Onitl Elevator Flat Cable with WireRope
1. The elevator flat cable is suitable for use in environments where theambient temperature is between -15℃ to 40
2.Under the normal conditions, the temperature of conductor is lower than 70
3.Cables are recommended for installations where the freely suspended length doesn't exceed 150m; and thespeed of travel doesn't exceed 6m/s
Cable Scope
| Nominal cross-sectional area mm2 | Number of cores |
| 0.75, 1 | 18~60 |
Note: We at Onitl can alsomanufacture elevator flat cable in accordance with the specific requirement ofcustomers.
Onitl
