F92 Automatic Multiport Softener Valves Manufacturer

F92 Automatic Multiport Softener Valves

Website: http://manufacturervalve.com

Featuring a flow rate of 5m³/h, the F92 automatic multiport softener valve features a planar and corrosion resistant gasket for opening and closing. Service, backwash, brine and slow rinse, refill and fast rinse functions can be realized. It is easily equipped with a bypass valve F70F which allows the flow of the original water source while regenerating.

Parameters

Model	F92A3 /F70FA（73605/41206L）/ F92B3 /F70FA（73605B/41206L）
Inlet/outlet	NPT1
Drain	NPT 3/4
Brine line connector	G3/8
Mounting base	2.5"-8NPSM
Riser pipe	1 "D-GB
Flow rate	5m³/h
Filter tank	6"--18"
Water pressure	0.15-0.6Mpa
Water temperature	5-50℃
Ambient temperature	5-50℃
Relative humidity	≤95%（25℃）
Power adapter	Input AC100~240V/50~60HZ Output DC12V/2A

Regeneration Mode

Model	Type	Description
A-01	meter delayed	Regeneration will be triggered when there's no remaining water and the current time is the same as the regeneration time
A-02	meter immediate	Regeneration will be triggered when there's no remaining water left.
A-03	Intelligent meter delayed	The capacity of produced water in a cycle is calculated according to the resin volume and feed water hardness. The regeneration method is the same as A-01.
A-04	intelligent meter immediate	The capacity of produced water in a cycle is calculated according to the resin volume and feed water hardness. The regeneration method is the same as A-02.
A-05	comparison of surplus water	Regeneration will be triggered when the remaining water is the same as or less than the average water consumption for the last 7 days and the current time is the same as the regeneration time.
A-06	timer clock	Regeneration will be triggered when the operation time set is over and the current time is the same as the regeneration time.