Elevator Cable and Wire (WDZ-BY, Y, RY, YR, RYY, YY, YYR)
Elevator Cable and Wire (WDZ-BY, Y, RY, YR, RYY,YY, YYR)
Construction
WDZ-RYY 300/500V 3*
Introduction of ElevatorCable and Wire
1. Insulation andSheath: PE insulation, PE sheath
2. Rated voltage: single core, 300/500V below
two cores and more, 300/500V below
single core, 0.6/1kV between
two cores and more, 0.6/1kV between
3. Under the normal conditions, the temperatureof conductor is doesn’t exceed
4. Max. halogen acid content: 5mg/g
5. Light transmittance in smoke: ≥60%
6. Flame-retardant test: passed the IEC60332-3:2004 test
7. Product standard:Refer to GB/T5023.3-2008, JB8734.2-1998, GB/T12706.1-2008, GB/T19666, BS7211:1998
Cable Scope
Specification | Nominal cross-sectional area mm2 | Number of cores |
DWZ-BY | 0.5-185 | 1 |
DWZ-Y | 0.75~185 | 1 |
DWZ-RY | 0.5-185 | 1 |
DWZ-YR | 0.75~185 | 1 |
DWZ-RYY | 0.75~2.5 | 2~37 |
DWZ-RYY | 4, 6 | 2~19 |
DWZ-RYY | 10~35 | 2~7 |
DWZ-YYR | 1.5~6 | 2~19 |
DWZ-YYR | 10~95 | 2~7 |
DWZ-YY | 1.5~6 | 2-19 |
DWZ-YY | 10~95 | 2-7 |
Note: We at Onitl can also design and manufacture elevator cable andwire according to customers’requirements.
Onitl is a